Factory For Pet Recycling Equipment - Waste Plastic Bottle Recycling Machine Line/PET Bottle Cutting, Washing, Drying Machine line/Waste plastic recycling Line – LIANDA

All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Hopper Dryers Injection Molding, Small Plastic Tray Shredder, Pet Crystallizer Machine, We warmly welcome your participation according to mutual rewards during the around long term.

---

Factory For Pet Recycling Equipment - Waste Plastic Bottle Recycling Machine Line/PET Bottle Cutting, Washing, Drying Machine line/Waste plastic recycling Line – LIANDA Detail:

PET Bottle Recycling Washing Line

LIANDA DESIGN

>> High level of Automation,effectively reduce labor costs (especially 24hours working)

>> Special blade design, Rotary blades can be used as Stable blades after times using to save blade cost

>> All the place which contact with material is made of Stainless steel 304, to prevent the secondary contamination of PET Flakes

>> Ideal impurity removal effect

1	Water content	About 1%
2	Final PET Density	0.3g/cbm
3	Total impurity content	320ppm
	PVC content	100ppm
	Metal content	20ppm
	PE/PP content	200ppm
4	Final PET Flake size	14-16mm or customized

Processing Flow

①Raw Material: Mulching film/Ground film →② Pre-cutter to be short pieces →③ Sand remover to remove the sands →④ Crusher cutting with water →⑤ High speed friction washer washing&dewatering →⑥ Forced strong high speed friction washer →⑦ Double step floating washer →⑧ Film squeezing&pelletizing dryer to dry the washed film at the moisture 1-3% →⑨ Double step granulating machine line to make pellets →⑩ Package and selling the pellets

Machine Technical Parameter

Model	Capacity KG/H	Installed Power KW	Steam Use kcal	Water Supply m3/hr	Area Requied L*W*H (M)
LD-500	500	185	Optional Choose	4-5	55*3.5*4.5
LD-1000	1000	315	Optional Choose	5-6	62*5*4.5
LD-2000	2000	450	Suggest Use	10-15	80*6*5
LD-3000	3000	600	80000	20-30	100*8*5.5
LD-4000	4000	800	100000	30-40	135*8*6.5
LD-5000	5000	1000	120000	40-50	135*8*6.5

Label Remover

>>To minimize the bottle neck breaking by reducing the rotaing speed of Label remover without affecting the label removing rate and output
>>Design of Arc Knife, the space between Rotary blades and Stable blades will be always the same to avoid breaking the PET Bottle necklace while Rotary blades and Stable blades rotating at 360 degree (The necklace is the best part in the bottle, the viscosity is the highest )
>>The blade and barrel wall are made of 10mm thick material, extending the service life of label remover by 3-4 years.. (Most in the markets are between 4-6 mm)

Plastic Bottle Crusher

>>The knife holder structure adopts a hollow knife structure design, which can better cut hollow plastics during crushing. The output is 2 times higher than the ordinary crusher of the same model, and it is suitable for wet and dry crushing.
>>All spindles have passed strict dynamic and static balance tests to ensure the reliability of machine operation.
>>Special blade design, Rotary blades can be used as Stable blades after times using to save blade cost

High Speed Friction Washer

>>Forced cleaning the dirty on the surface of flakes
>>With the design of dirty water de-watering. To keep water clean on the next step washing processing. En-longer the water using
>>Adopt NSK bearing
>>Rotating speed 1200rpm
>>Screw blades design, uniform discharge, full friction cleaning, high water utilization rate, remove labels and other impurities.
>>Frame structure, less vibration.

Floating Washer

>> Removing the dust and dirty after the High speed friction washer
(Because of the property of the plastic — PP/PE will be floating on the water; PET will be down in the water)
>> To middle PH Value

Steam Washer–Hot washing

>> With quantitative feeder for chemical detergent
>> Electrical heating and steam heating are available
>> Caustic soda concentrarion: about 1-2%
>>Use a special paddle inside to stir the flakes with water. The flakes will remain in a hot scrubber for at least 12 minutes to ensure full cleaning.
>>PH automatic detection and control system
>>Hot water can be reused with our special design, saving 15%-20% energy
>>Cap separation and collection design
>> Temperature controller

Horizontal Dewatering Machine

>> Final moisture can be less than 1%
>> Adopt European standard belt wheel and SKF Bearing
>>Adopt American wearing material to en-longer the working life of screw

Label Separator+ Self-lifting Packing Storage

>> to separate PP/PE Labels from PET Flake and remove plastic powder
>>Separation ensures label separation rate >99.5% and powder <1%
>>There are the Dosing machine on the top of Zigzag separator
>>Adopt self-lifting jumbo bag by hydraulic

Cost Calculate For Reference

The finished bottle flakes produced by the PET bottle flake washing line are generally Blue&white bottle flake,Pure Transparent bottle flakes,and Green bottle flakes. The raw materials of the purchased plastic bottle contain some impurities, such as bottle caps, label paper, sand , Water, oil and other impurities. When purchasing, you must accurately determine the content of impurities in the raw materials, otherwise it is easy to make mistakes and cause damage to your interests. Generally speaking, for clean plastic bottle raw materials, after the PET bottle flake washing line is produced, the content of the bottle cap is 8% (the cap is made of PP and can be sold directly), and the content of the label is 3%. The content of water and oil is 3%, and the content of sand and other impurities is 3%

In the bottle flakes produced by the PET bottle flake washing line, in addition to impurities, there is also the problem of the proportion of color bottle materials. As we all know, the price of pure white flakes is the highest, followed by blue flakes and green flakes. According to the current China average level, the ratio of white, blue, and green is 7:2:1. If the ratio of blue-green bottles is too high, the sales price of finished products will decrease, which will inevitably affect the profit level.
The current bottle brick price is about RMB3000-3200, assuming a daily processing capacity of 10 tons
10 tons of bottle bricks can produce 8.3 tons of flakes, 0.8 tons of bottle caps, and 0.3 tons of label paper
Cold water blue and white film price RMB 4000-4200 per ton, bottle cap RMB 4200 per ton, label paper RMB800 per ton
Raw material cost: RMB30000-32000
Sales price: bottle flakes RMB8.3*RMB4000/4200=RMB 33200/34860
Bottle cap RMB0.8*4200=RMB3360
Trademark paper RMB0.3*800=RMB240
Gross profit per day RMB36800-30000=RMB6800 yuan

---

Product detail pictures:

---

Related Product Guide:

---

"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm for the long-term to create jointly with consumers for mutual reciprocity and mutual reward for Factory For Pet Recycling Equipment - Waste Plastic Bottle Recycling Machine Line/PET Bottle Cutting, Washing, Drying Machine line/Waste plastic recycling Line – LIANDA, The product will supply to all over the world, such as: United Arab Emirates, Roman, Manila, Insisting over the high-quality generation line management and prospects guide provider, we've made our resolution to offer our shoppers using the initially stage purchasing and soon after provider working experience. Preserving the prevailing helpful relations with our prospects, we even now innovate our product lists the many time to meet up with the brand new wants and stick to the latest trend of this business in Ahmedabad. We're ready to facial area the difficulties and make the transform to grasp many of the possibilities in international trade.