Layin sake yin amfani da fim ɗin ciyawa
Layin Injin Maimaita Fim ɗin Ciki
Injin Lianda ya ƙware a matsayin ƙera fim ɗin filastik, kayan aikin sarrafa fim na sharar gona fiye da shekaru 20. Ana sabunta kayan aiki akai-akai, haɓakawa da haɓakawa kumasannu a hankali ya samar da cikakken shirin sake yin amfani da su.
>>Bayan an tattara fim ɗin sharar, za a fara sarrafa shi --- Pre-yanke ko yanke manyan rolls/bales na sharar fim ɗin zuwa ƙarami, sannan a ciyar da shi.mai cire yashiinjidon samun maganin kawar da yashi, saboda yawan abin da ke cikin laka zai rage yawan ruwan wukake na aiki, wanda kuma zai shafi ingancin tsaftacewa.
>>Fim din zai kasance mai karancin yashi bayan injin cire yashi, sannan ya shiga cikincrusherdomin lafiya murkushe magani. Lokacin murkushe, ana ƙara ruwa don murkushewa, wanda zai iya taka rawa na tsaftacewa na farko.
>>Kasan na'urar tana sanye da na'urar da za ta iya wanke laka da dattin da ke jikin fim din. Sashin yana cike da ruwa don tsaftacewa, kuma tsabtace tsabta yana sama da 99%.
>>Fim ɗin da aka goge yana shiga cikin kwalta sannan yana yawo tankin kurkura don kurkura, sannan kayan fim ɗin da aka wanke ana tonawa a cikin injin matsewa da injin tonowa don matsewa da cire ruwa. Bayan haka za a haɗa shi da layin granulating don yin granules.
Gudun Gudanarwa
①Raw Material: Fim ɗin mulching/Fim ɗin ƙasa →②Pre-yankezama gajere guda →③Mai cire yashidon cire yashi →④Crusheryankan da ruwa →⑤Babban saurin gogayya mai wankiwankewa&dewatering →⑥Mai wanki mai ƙarfi mai ƙarfi mai ƙarfi tilas→⑦ Mataki mai yin iyo →⑧Fim ɗin matsi & bushewar bushewadon bushe fim ɗin da aka wanke a danshi 1-3% →⑨Layin injin granulating mataki biyudon yin pellets →⑩ Kunshin da sayar da pellet ɗin
Bukatar Layin Ƙirƙira Don Magana
| No | Abu | Bukatar | Lura |
| 1 | Layin samarwa sarari Bukatar L*W*H (mm) | 420000*3000*4200 | |
| 2 | Bukatar taron bita | ≧1500m2 Ciki har da yankin ma'ajiyar albarkatun ƙasa da yankin ajiyar samfur na ƙarshe | |
| 3 | Jimlar ikon shigarwa | 180 kw Koma zuwa layin samarwa kamar yadda aka ambata a sama | Amfanin makamashi ≈70% |
| 4 | Amfanin ruwa | ≧15m3 a kowace awa (Tare da ruwan zagayawa) | |
| 5 | Bukatar aiki | Ciyarwa ---- mutum 2 Kunshin ---- mutum 1 Ma'aikacin layin samarwa ----1 mutum cokali mai yatsu ---- 1 raka'a |
Pre-Yanke Ta Hanyar Ruwan Ruwa
>> Pre-yanke dogon mulching fina-finan zuwa gajerun guda domin Sand cire ciyarwa
Cire Yashi&Ciyawa
>>Ana amfani da na'urar cire yashi musamman wajen cire yashi, ciyawa, ganyen da ake hadawa da fim din Noma. Mai cire yashi yana ɗaukar matsa lamba na iska don raba abu mai nauyi daga kayan haske.
>> Amfanin:
■ Mai cire yashi zai yi aiki ba tare da ruwa ba
■ Babban inganci tare da ƙarancin wutar lantarki
■ Sauƙi don yin aiki, tsawon rayuwar aiki
■Don riga-kafin wanke fim ɗin noma, don kare ƙwanƙarar ruwa da adana ruwa
Fim Crusher
A cikin m da lafiya murkushe tsari, bisa ga halaye na karfi tauri da kuma high entanglement na LDPE fim da PP saka jaka, mun tsara biyu V-dimbin yawa murkushe wuka mariƙin da baya wuka-type shigarwa tsarin wanda zai kara girman da wuka. iyawar ya zama ninki biyu, amma ƙasa da farashin makamashin lantarki
>> Ɗauki firam ɗin ruwa biyu, tsarin wuƙa na baya, fitarwa sau biyu
■ Idan aka kwatanta da sauran layin wanki na sake amfani da fim, yana rage farashin lantarki, yana rage nauyin wutar lantarki na masana'antar abokin ciniki.
Tilastawa Mai Tsabtace Tsayawa Mai Girma
>>Don mai wanki mai ƙarfi mai ƙarfi mai ƙarfi sannan a cire ƙazantaccen ruwan kafin fim ɗin ya shiga cikin wanki mai iyo
n Gudun juyawa zai iya zama 1250rpm
∎ Ƙirƙiri ƙira na musamman don fim, tabbatar da cewa babu makale, yana aiki barga
■ Tare da aikin de-watering
Wankewa mai iyo
>> Dauki nau'in "V" na ƙasa.
■Kasan tanki mai kurkura yana sanye da nau'in na'urori masu fitar da sinadarai masu tsini. Lokacin da datti ko datti ya yi yawa a ƙasan tafki, kawai buɗe bawul ɗin fitarwa na slag don fitar da laka a kasan tanki, ba tare da canza ruwan tafkin gaba ɗaya ba. Ajiye amfani da ruwa
>> A cikin aikin kurkura da fitar da ruwa, ana amfani da hanyar da ake amfani da farantin sarkar tangent digging digging a maimakon hanyoyin watsa ruwa na gargajiya.
Fim ɗin Matsewa Pelletizing Drer
>> Cire ruwan fim ɗin da aka wanke ta hanyar dunƙule turawa da dumama wutar lantarki. tare da dunƙule squeezing da kai gogayya dumama, da wanke fina-finan za a yi high digiri na bushewa & rabin plasticized, low ikon amfani, high fitarwa. Danshi na ƙarshe shine kusan 2%.
>>Tsarin ganga an yi shi ne da ganga mai ciyar da kayan abinci, ganga mai matsawa da ganga mai filastik. Bayan ciyarwa, matsi, fim ɗin za a yi filastik kuma a yanka shi zuwa barbashi ta pelletizer wanda aka sanya baya ga mold.
■Ciyar da Uniform ba tare da makale ba
■Samar da cire ruwa fiye da 98%
■Rashin farashin makamashi
■ Sauƙi don ciyar da barbashi zuwa extruder da kuma kara girman ƙarfin extruder
■ Tsaya ingancin ƙãre barbashi
An Nuna Samfuran Aikace-aikacen
