PLA POTRMEFORMION FREEDE
Ahịhịa mpempe akwụkwọ na-enye onwe ya
Uru anyị na-eme
>> Landia welite naA na-eji klọọkụ kristal na-emegharịMaka mpempe akwụkwọ anụ, 20mins tupu ihicha na kristal, mmiri ikpeazụ nwere ike ịbụ ≤50ppm (sistem igwe na-arụ ọrụ nke ọma, ikpeazụ
Usoro ntụgharị ahụ nwere akụrụngwa nke oke ike, usoro mmepụta dị mfe na mmezi dị mfe.
Ihe owuwu scragged nwere ike belata mfu viscosict nke resin, ihe omimi na mkpali elu na-eme ka mmetụta ahụ dị mma, ike na ụdị mpempe akwụkwọ.
Otutu ihe mejuputara nri na-ejikwa pasent nke ihe ohuru, reclecling ihe na nna ukwu wee were kpọmkwem ,.
Edeela mpempe akwụkwọ ahụ maka ụlọ ọrụ nkwakọ ọkụ.
WeebụsaịtịOnrared Crickstal ---- Akọrọ & Part Frakes R-Bat Flakes / Chips na 20Mins na 305-50% ike na-akwụ ụgwọ.
※Na-egbochi mbibi hydrolytic nke viscosity.
※ Na-egbochi mmụba AA maka ihe eji eme nri
※ Na-abawanye ikike nke usoro mmepụta ihe ruru 50%
※ Oganihu ma mee ka ngwaahịa dị mma-- nke nha na ntinye akwụkwọ na-eme ugboro ugboro nke ihe ahụ
Belata ọnụ ahịa nke mpempe akwụkwọ: ruo 60% na-adịchaghị ike karịa nke na-egbu egbu
Ntughari ngwa ngwa na ngwa ngwa mechie --- Enweghị mkpa ikpo ọkụ
A ga-ahazi na mkpuchi na kristal na otu nzọụkwụ
Iji melite ike tensile nke mpempe akwụkwọ mpempe akwụkwọ, nwekwuo uru ahụ--- Ihu mmiri nwere ike ịbụ ≤30ppm site na 20minsAkọrọ & Crystallization
- Ejiri akara igwe eji eji igwe eji eme ihe
- Kpuchie mpaghara pere mpe, ihe owuwu ma dị mfe iji rụọ ọrụ na mmezi
- Okpomoku nke okpomoku na ihicha oge
- Enweghị oghere nke ngwaahịa nwere oke dị iche iche
- Mfe ọcha ma gbanwee ihe
>> Pet EXS
| Mogosi | Ọtụtụ oyi akwa | Otu oyi akwa | Nke oma |
| Nkọwapụta nke Exuder | Ld75 & 36 / 40-1000 | Ld75 / 40-1000 | Ld95 & 62 / 44-1500 |
| Nke ngwaahịa ngwaahịa | 0.15-1.5mm | 0.15-1.5mm | 0.15-1.5mm |
| Isi Ike moto | 110KW / 45KW | 110KW | 250KW / 55KW |
| Max Iwe ikike | 500KG / H | 450KG / H | 800-1000KG / H |
Ndepụta igwe
| Ngwakọta igwe | ||
| NO | Machiini | Nke ukwu |
| 1 | Perrared Crickstal | 1 setịpụrụ |
| 2 | Vakum cand | 1 setịpụrụ |
| 3 | Okpukpu abụọ cender | 1 setịpụrụ |
| 4 | Vacuum na-adịghị mma nrụgide | 1 setịpụrụ |
| 5 | Okpukpu abụọ ọwa | 1 setịpụrụ |
| 6 | Gbazee mgbapụta | 1 setịpụrụ |
| 7 | Ebube Pet | 1 setịpụrụ |
| 8 | A na-eji akụkụ atọ | 1 setịpụrụ |
| 9 | Ibe mmanụ mmanụ silicone na ngwaọrụ oven | 1 setịpụrụ |
| 10 | Ngwakọta na-egbutu ngwaọrụ | 1 setịpụrụ |
| 11 | Ngwaọrụ gbakere | 1 setịpụrụ |
| 12 | Systemgbọala abụọ na-agagharị | 1 setịpụrụ |
| 13 | Simes-igwe na-ejikwa igwe | 1 setịpụrụ |
Foto igwe
Ajụjụ
Ajụjụ: Kedu mmiri ikpeazụ ị nwere ike inweta? You nwere mgbochi ọ bụla na mmiri mbụ nke akụrụngwa?
A: Na mmiri ikpeazụ anyị nwere ike nweta ≤30ppm (were anụ ahụ dịka ọmụmaatụ). Mmiri mmiri mbụ nwere ike ịbụ 6000-15000ppm.
Ajụjụ: Anyị na-eji mpempe akwụkwọ crans u okpukpu abụọ nke nwere oghere mpempe akwụkwọ mpempe akwụkwọ, anyị ka ga-eji pre-ihicha?
A: Anyị na-atụ aro iji akwa a na-asacha tupu iwe. Ọtụtụ mgbe, usoro dị otú a nwere usoro siri ike na mmiri mbụ nke anụ. Dịka anyị maara na anụ ụlọ nwere ike ịnabata mmiri nke ikuku site na ikuku nke ga-eme ka ịmịnye mmiri na-arụ ọrụ nke ọma. Yabụ na anyị na-atụ aro iji akwa nhicha tupu usoro ịmịpụta gị:
Malite >> Mmachi anya nkọcha nke viscosity
WeebụsaịtịNa-egbochi mmụba AA maka ihe eji eme nri
>> Ibawanye ikike nke usoro mmepụta ihe ruru 50%
Malite >> Onye ọrụ na imepụta ngwaahịa ahụ siri ike-
Ajụjụ: Anyị ga-eji ihe ọhụụ mana anyị enweghị ahụmịhe ọ bụla maka ihicha ihe ndị dị otú ahụ. Nwere ike inyere anyị aka?
A: ụlọ ọrụ anyị nwere ebe nnwale. N'ụlọ ule anyị, anyị nwere ike ịme nyocha ma ọ bụ kwụsịchaa maka ihe atụ ndị ahịa. A na-eji ngwa ọrụ na teknụzụ anyị zuru oke.
Anyị nwere ike igosipụta --- na-ezinye / ibugharị, ihicha & kristal, ịbelata.
Ihicha ihe na itiri ihe iji chọpụta mmiri mmiri, oge obibi, ntinye na akụrụngwa.
Anyị nwekwara ike igosipụta arụmọrụ site na mbanye maka obere bat.
Dabere na ihe gị na ihe ndị na-emepụta ihe, anyị nwere ike iji gị maapụ atụmatụ.
Injinia nwere ahụmahụ ga-eme nnwale ahụ. A na-akpọ ndị ọrụ gị ọrụ ka ha soro na-esonye na okporo ụzọ. Ya mere, ị nwere ma ekwe omume itinye aka na-arụ ọrụ na ohere iji hụ ngwaahịa anyị na-arụ ọrụ.
Ajụjụ: Kedu oge nnyefe nke IRD gị?
A: Bọchị 40 na-arụ ọrụ kemgbe anyị nwetara nkwụnye ego gị na akaụntụ ụlọ ọrụ anyị.
Ajụjụ: Kedu maka ntinye nke IRD gị?
Injinia nwere ahụmahụ nwere ike inye aka nwụnye sistemụ IRD maka gị na ụlọ ọrụ gị. Ma ọ bụ anyị nwere ike inye ndị na-eduzi ụzọ na ahịrị. Ngwaọrụ niile nke a na-emegharị avations, ọ dị mfe maka njikọ.
Ajụjụ: Kedu ka enwere ike itinye IRD maka?
A: Ọ nwere ike ịbụ onye na-asacha maka
Pet / PLA / TPE mpempe akwụkwọ
PET BET SURP na-emegharị igwe
Pet masterbatch na ihicha
Petg mpempe mpempe akwụkwọ
Nnukwu igwe Monofilerment, Pet Monofilement Internation, Pet Monofiles maka aziza
PLA / PET na-eme ihe nkiri
PBT, HDPE, HDPE, LDP, LCP, PC, PV, PVC, PEK, PEK, PPT, PPS wdg.
Usoro ikuku makaMwepu nke oligomeren na ihe na-agbanwe agbanwe.
