PET Flake / scrap dehumidifier crystallizer

Tlhaloso e Khutšoanyane:

Ho tsosolosa li-flakes ka extruder ho fokotsa IV ka lebaka la hydrolysis i boteng ba metsi, 'me ke ka lebaka leo ho omisa pele ho boemo ba ho omisa ka mokhoa o ts'oanang le IRD System ea rona ho ka fokotsa phokotso ena. Ho phaella moo, resin ha e mosehla hobane nako ea ho omisa e fokotsehile (Nako ea ho omisa e hloka feela 15-20mins, mongobo oa ho qetela o ka ba joalo≤ 50ppm, tšebeliso ea matla e ka tlase ho 60W/KG/H), 'me ho kuta ka har'a extruder ho boetse ho fokotsehile hobane thepa e futhumetseng e kena ka har'a extruder ka mocheso o sa khaotseng "

Boima ba li-flakes ka mor'a IRD: e tla eketseha ka 15-20%
Mongobo oa ho qetela : ≤30ppm
Viscosity: Ho fokotsa ho senyeha ha hydrolytic ea viscosity.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Mohlala oa Kopo

Lisebelisoa tse so ntlafatsoe	PET Recycled flake/ PET sheet scrap/PET Preform scrap
Ho sebelisa Mochini	LDHW-600 * 1000
Ho omisa & Crystallized Mocheso sete	180-200 ℃E ka feto-fetoha ka thepa ea lihlahisoa tse tala
Crystallized nako e behiloeng	20metsotso
Boitsebiso ba ho qetela	Likhechana tsa PET tse khabisitsoeng le tse omisitsoeng lemongobo oa ho qetela o ka ba 30ppm

Mokhoa oa ho Sebetsa

Ho fepa/Loading

Ts'ebetso e omileng le ea Crystallization

Ho qhala

>> Mohato oa pele, sepheo se le seng feela ke ho futhumatsa thepa ho fihlela mocheso o seng o setiloe.
Amohela lebelo le batlang le lieha la ho potoloha ha moropa, matla a mabone a Infrared a omisitsoeng a tla ba boemong bo holimo, ebe li-pellets tsa PET li tla futhumala ka potlako ho fihlela mocheso o nyolohela mochesong o behiloeng esale pele.

>> Ho omisa & Crystallizing mohato
Hang ha thepa e fihla mochesong, lebelo la moropa le tla eketsoa ho lebelo le phahameng haholo la ho potoloha ho qoba ho bokellana ha thepa. Ka nako e ts'oanang, matla a mabone a infrared a tla eketsoa hape ho qeta ho omisa. Joale lebelo la ho potoloha ha moropa le tla fokotsoa hape. Ka tloaelo mokhoa oa ho omisa o tla phethoa ka mor'a 15-20mins. (Nako e nepahetseng e itšetlehile ka thepa ea thepa)

>> Kamora ho qeta ts'ebetso ea ho omisa, Drum ea IR e tla ntša thepa ka bo eona ebe e tlatsa moqomo hape bakeng sa potoloho e latelang.
Ho tlatsa hape ka othomathiki hammoho le liparamente tsohle tse amehang bakeng sa litselana tse fapaneng tsa mocheso li kenyelelitsoe ka botlalo taolong ea boemo ba morao-rao ea Touch Screen. Hang ha li-parameter le li-profiles tsa mocheso li fumanoa bakeng sa thepa e itseng, litlhophiso tsa thesis li ka bolokoa e le diresepe tsamaisong ea taolo.

Molemo oa Rōna

Ka tloaelo PET Bottle flakes kapa sheet scrap le boemo ba pele ba mongobo ho fihla ho 10000-13000ppm. Li-flakes tsa PET Bottle kapa li-sheet scrap (Moroetsana kapa tse tsoakiloeng) li tla nchafatsoa ka infrared crystal dryer ka 20mins, mocheso o omisang o tla ba 150-180 ℃ ebe o omisoa ho 50-70ppm, ebe o fepeloa ho Single screw extruding system bakeng sa ts'ebetso e tsoelang pele.

● Ho fokotsa ho senyeha ha hydrolytic ea viscosity.
● Thibela ho eketseha ha maemo a AA bakeng sa lisebelisoa tse amanang le lijo
● Ho eketsa bokhoni ba mohala oa tlhahiso ho fihlela ho 50%
● Ntlafatsa le ho etsa hore boleng ba sehlahisoa bo tsitse-- Mongobo o lekanang le o phetoang oa thepa

● Ho fihla ho 60% ho fokotseha ha tšebeliso ea matla ho feta mokhoa o tloaelehileng oa ho omisa

● Ha ho na karohano ea lihlahisoa tse nang le bongata bo fapaneng

● Mocheso o ikemetseng le nako ea ho omisa e behiloeng

● Ho hloekisa habonolo le ho fetola thepa

● Ho qala hang-hang le ho koala kapele

● Ho khabisa ka mokhoa o tšoanang

● Ha ho li-pellets tse khomarelang le ho khomarela

● Ho tšoara lintho ka hloko

Lethathamo la Papiso

Ntho	IRD Dryer	Se omisitsoeng se Tloaelehileng
Mokhoa oa ho fetisa	Ha ho letho	Moea o chesang
Phetiso ea mocheso	Ka bobeli ka hare le ka ntle likaroloana hammoho.	Ho tloha ka ntle ho ea ka hare ho karoloana butle-butle.
Matla	Boloka bonyane matla a 20 ~ 50% ha a bapisoa le se omisang se tloaelehileng.	Sebelisa matla a mangata.
Nako ea ts'ebetso	1. Crystallization & drying: Li sebetsoa ka nako e le 'ngoe nakong ea metsotso e ka bang 8 ~ 15. 2. Ho omisa le crystallization ka nako	1. Crystallization: Hoo e ka bang metsotso e 30 ~ 60. 2. Ho omisa: Hoo e ka bang lihora tse 4 ~ 6.
Mongobo	1. Tlas'a 50-70 PPM ka mor'a hore IRD e sebetsoe.	1. Sebelisa metsotso e 30 ~ 60 ho fetola PET ea amorphous ho PET e khanyang pele. 2. Tlas'a 200PPM ka mor'a lihora tse ka bang 4 dehumidifier e sebetsoa. 3. Tlas'a 50 PPM ka mor'a lihora tse ka bang 6 hore dehumidifier e sebetsoe.
Lead time	20metsotso	Ho feta lihora tse 6.
Phetoho ea lintho tse bonahalang	1. Ho bonolo le kapele. 2. Ho na le makhetlo a 1 ~ 1.5 feela a tšebeliso ea thepa ka hora ka har'a buffer hopper.	1. Ho thata & butle. 2. Ho na le makhetlo a 5 ~ 7 bokhoni ba tšebeliso ea thepa ka hora ho crystallizer & hopper.
Tshebetso	E bonolo--- Ka taolo ea Siemens PLC	Ho thata joalo ka ha e tlameha ho kenya PET e nyane ka har'a kristale ha e qala ts'ebetso.
Tlhokomelo	1. E bonolo. 2. Litšenyehelo tse tlase tsa tlhokomelo.	1. Thata. 2. Litšenyehelo tse phahameng tsa tlhokomelo.

Linepe tsa mochini

Teko ea Mahala ea Boitsebiso

Moenjiniere ea nang le boiphihlelo o tla etsa tlhahlobo. Basebetsi ba hau ba memeloa ka mofuthu ho nka karolo litseleng tsa rona tse kopaneng. Kahoo u na le monyetla oa ho kenya letsoho ka mafolofolo le monyetla oa ho bona lihlahisoa tsa rona li sebetsa.